Tips: Underground Conduit Placement 👷

Some of our Race customers require Underground Conduit Placement in order to run fiber-optic to the home.  We at Race want to ensure that our customers have the information they need to make this a smooth process and have provided the following specifications to help.  The homeowner/developer/contractor is responsible for providing and adhering to the following underground requirements set by Race.

Remember that you can always call us at 877-722-3833 for any assistance.       

Scheduling ⏰

  • RACE needs to submit permit to Pole Owner and permit approved before any of these specifications can be executed.
  • Prior to the installation of any conduit, a RACE Communications Field Engineer will need to be scheduled to verify conduit route, pole conduit stub out, and home stub out.
  • A RACE Communications Field Engineer will need to be scheduled for conduit inspection before trench fill. Two days advance notice must be provided prior to conduit inspection, with a three day inspection window.
  • It is the homeowner / developer / contractor’s responsibility to contact “Call Before You Dig” prior to any excavation. 
  • It is the homeowner / developer / contractor’s responsibility to contact local building department for any permitting requirements.
  • RACE Communications will reserve the right to refuse fiber installation if any of these specifications are not met.
  • A scaled print of the project showing the lot layout. To be reviewed with RACE Communications Field Engineer.

Dimension 📐

  • Any conduit run under 250’ will require 3/4 inch Schedule 40 PVC conduit.*
  • For any run between 251’ and 400’, it will require a 3/4 inch Schedule 40 PVC conduit with a pull box.*
  • Any conduit run over 400’ will require a pull box location.
  • All conduits, sweeps, and couplers will be glued with PVC cement.
  • Sweeps are to be utilized at any splice location, riser pole, or structure. No Hard 90 degree bends to be used. A maximum of 3 sweeps in conduit run. 
  • All conduit runs to have ¼” nylon pull rope installed within it. Both ends of rope should be secured to outside of conduit and accessible.
  • Conduit at pole location will need to be stubbed up 2’ minimum.
  • Conduit at structure location will need to be stubbed up 4’ minimum.
  • Conduit install depth on private property is 12 – 18 inches. Please contact local building department for required private property depth based on county specifications. 
  • *note: you will not be able to run additional wires or cables in the same conduit should you use a 3/4 inch conduit. Underground Conduit Placement Specifications

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s